A hanging filtration system is probably the easiest one for starting your aquarium. All this system does is hang on the back of your tank and cycle your water. This is probably the least complex way to go if you want to start your aquarium and do more research to upgrade later. It is also the least expensive filter as well. The way these filter works is the water is sucked up into your filter by the intake tube and cycles through your filter then is reintroduced to your tank by some sort of waterfall or a return tube to create a small current.
This filtration system requires little maintenance. The hang-on filter consists of a housing body. The housing body will hold all of the filter inserts and will be where the water cycles through. It will have an intake tube. That will be inserted into the water in your aquarium and suck water into your filter housing. You will also have filter media cartridges. It will have the return spout. This is how the clean cycled water from your filter will return to your aquarium. Sometimes the motor of the filter can be detached to be cleaned. But also times it is not able to be detached. Your filter cartridge will be your mechanical, chemical, and biological filtration.
✅ Best Penn-Plax Cascade Hang-on Aquarium Filter with Quad Filtration System
Good Filter-Incredible Value – This filter is quiet and well-made. It took a minute or less to assemble, and everything fit well, had a quality feel, and fit perfectly together. The filter media last extremely well, much longer than the carbon contained permanently within the replaceable cartridge.
✅ Best Internal Green Water Killer Filter Aquarium Tank U-V Pump
Works well. – Been fighting green water issues for a while due to proximity to window. After an aggressive 50% water change, installed the UV filter. Pro is…it’s made your tank water clear in a day, and has kept it clear (10 gallon tank w/two filter wool/charcoal corner filters). Love that part of this product. Next, needed improvements (why it’s only 2 stars), no filter media at intakes. It has been running for a few weeks with no problems. It is very quiet and seems to put out some pretty good flow. Overall it is very effective and works as a UV filter. would purchase again.
✅ Best Aquarium Hang-On Back Power Filter System
Really happy with this filter – This is a great filter, it’s quiet and does a great job cleaning your tank. skimmer handles the surface oil issue your tank has had. Really like the generic baskets for carbon and bio-material since they don’t try to lock you into proprietary stuff. Runs pretty smoothly and quiet. The flow control knobs are also nice
Hang-on filters need minimal maintenance. You will want to replace your filter media cartridges about once every three to four weeks. This will ensure that your filter is continuously flowing with clean water and keeping all of your levels where they need to be. After having your filter for a longer period of time you may want to do a deep clean of it. Over time algae will build up in your filter and it could slow your flow or even block it. If your tank has a bio-wheel It should never be cleaned or become dry because that can cause the good bacteria on it to die.
Setting up your hang-on back filter is simple. All you would need to do to set up your filter would be to assemble your intake tube and the media cartridge. after that, it should tell you on the box whether you would need to run it dry or automatically put your aquarium water into it and run the filter. Once you have your filter set up and running you should let it cycle for one to two weeks before adding fish. After it is cycling and running well you are ready to add some fish! I hope this helps new hobbyists out to know a little more about hang-on back filters!
I hope this helped you learn a little bit about probably the easiest filter there is for any aquarium. If you have any questions or concerns please do not hesitate to leave a comment. I would love to try and help you out as much as I can.